How to Choose Waterproof Motorcycle Gloves | Fit, Cuffs, and Safety

Buy motorcycle-specific gloves with a named waterproof-breathable membrane, EN 13594:2015 certification, and a gauntlet cuff that overlaps your jacket sleeve.

Rain finds the seam at your wrist first. A glove that keeps water out of the shell but leaves a gap between cuff and sleeve soaks your hands anyway, and no membrane fixes a short cuff. Getting waterproof motorcycle gloves right comes down to four matching jobs: the weather you ride in, how long you’re out, the temperature, and what protection the glove actually carries.

The order below is the one that avoids returns — protection and cuff first, membrane and insulation after, brand last.

Start With Certification, Not the Waterproof Label

Look for EN 13594:2015 on the product page or the glove’s label before anything else. That standard is what separates a motorcycle glove from a waterproof glove with a motorcycle logo on it.

A CE rating tells you the glove was tested as riding gear. Within it, check the stated impact and abrasion protection zones: knuckle armor, palm sliders, finger reinforcement. Material names alone don’t establish a rating — a page that says “leather palm” without naming a certification level hasn’t told you much.

  • Knuckles: rigid or energy-absorbing armor, not a padded bump.
  • Palm: sliders or reinforced panels at the heel of the hand.
  • Fingers: reinforcement across the impact points.

Waterproof gloves built for street riding often carry Level 1 protection, which is a real rating, not a downgrade — it’s simply the tier most gloves in this class occupy.

The Cuff Is Where Water Gets In

For sustained rain, choose a gauntlet cuff with hook-and-loop adjustment that overlaps your jacket sleeve. A short cuff can leave a wrist gap, and water running down a sleeve will find it.

This is the single most common buying mistake: paying for a good membrane and sealing it against nothing. Try the glove on with your riding jacket, not a t-shirt, and check that the cuff pulls over the sleeve without riding up when you turn the bars.

Reading Membrane and Insulation Specs Honestly

A named waterproof-breathable system is the reliable marker — GORE-TEX states its glove technologies are waterproof, windproof, and breathable, and other manufacturers publish membrane names of their own. Some go further and publish figures such as 20,000 mm waterproofing with 20,000 g/m²/24 h breathability. Treat proprietary membranes without published test data as unmeasured rather than equal.

Waterproof is not warm. Insulation has to match your climate and speed, and there’s a real trade: heavy insulation dulls lever feel in warm weather, while an uninsulated glove wants a liner in the cold.

Glove Key Specs Listed Price
Oxford Rainseal Pro Hydracore membrane; editorial testing reported slight seam moisture after about an hour of steady rain $59
Five Boxer EVO WP Goatskin leather, PrimaLoft Silver 80 g, 5_DRYTECH membrane, knuckle armor, TPR palm slider, CE Level 1 $90
Leatt ADV HydraDri 7.5 HydraDri EVO at 20,000 mm / 20,000 g/m²/24 h, EN 13594:2015, 3DF impact foam, palm sliders, above-wrist cuff $99.40 (sale, from $142)
Alpinestars Bogota Drystar XF Drystar XF membrane, PrimaLoft insulation, injected armor, CE EN 13594:2015 $155
Held Air N Dry GTX II GORE-TEX 2-in-1 construction, kangaroo-leather palm, SuperFabric reinforcement, hard knuckle protection, CE Level 1 $329
SPIDI Mistral H2OUT EN 13594:2015 Level 1, H2OUT membrane, 100 g thermal layer Check retailer
Alpinestars SP X Z Drystar Drystar liner, double-density TPU knuckles, CE Level 1 Check retailer

Prices move and stock disappears; verify the manufacturer or retailer page at purchase. GORE-TEX’s own glove technology page is the clearest starting point for what a membrane claim actually covers, and if you’d rather skip the comparison work, our tested roundup of waterproof motorcycle gloves pairs each pick with the riding it suits.

Fit, Controls, and Buying Checklist

Waterproof liners add bulk, so a glove that fits in summer textile can pinch once a membrane and insulation are inside. Fingers should reach the ends without compression, seams shouldn’t press on fingertips, and the palm shouldn’t bunch when you grip the bars.

Try gloves while holding a handlebar-like grip and working the brake and clutch levers in your head. Touchscreen fingertips and visor-wiper panels are conveniences that come after protection and fit — and no touchscreen feature is worth using while riding; stop before touching a phone.

  1. Define the use: short commute, touring, adventure, cold-weather, or warm-weather rain.
  2. Pick the cuff: gauntlet and sleeve overlap for prolonged rain.
  3. Confirm EN 13594:2015 and the stated impact, palm, finger, and abrasion zones.
  4. Compare membrane name, insulation weight, and any published waterproof/breathability figures.
  5. Confirm US sizing, return terms, and replacement availability.

Dry gloves at room temperature, never on high heat — heat damages leather, adhesives, and membranes. When in doubt, follow the maker’s care instructions.

Common Questions

Is water-resistant gear good enough for rain?

Water-resistant and windproof are not waterproof. A water-resistant shell handles a light shower or road spray and then wets through. For steady rain, you want a glove whose product page states a waterproof membrane, ideally by name, plus a cuff that seals against your jacket sleeve.

Do I need insulated gloves for wet-weather riding?

Only if the temperature calls for it. Insulation is a warmth decision, separate from waterproofing, and heavier insulation reduces lever feel. Riders in mild climates often do better with an uninsulated waterproof glove and a separate liner for cold mornings than with one heavily insulated pair year-round.

How much should waterproof riding gloves cost?

There’s a real spread.

Sources

Scroll to Top