Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Wet hands are the real problem with cold-weather riding. Once your fingers soak through, you lose feel for the levers, the throttle gets vague, and every stop becomes a fumble. The gloves below all claim genuine waterproofing — a real membrane or sealed shell, not just a water-repellent spray — and each one solves the wet-hands problem a slightly different way. Some pack CE certification, some lean on Gore-Tex, and a couple are built for riders who only brave the cold on occasion.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
There is a difference between “water-resistant” and truly sealed, and knowing which badge means what will save you a soaked commute. This breakdown of the best waterproof motorcycle gloves separates the genuinely sealed shells from the spray-on pretenders.
Top Picks



How To Choose The Best Waterproof Motorcycle Gloves
You need to answer three questions: how wet do you actually ride, how cold is your winter, and do you need armor or just warmth?
Membrane versus coating: what “waterproof” really means
A real waterproof glove has a membrane — a thin sealed layer stitched inside the shell that blocks water but lets sweat vapor escape. A coating sits on the outside fabric and wears away with use. When a listing says “waterproof layer” and names a four-layer build, that usually means a proper membrane is inside. When it only says “water-resistant shell,” expect it to shed drizzle and give up in steady rain.
Knuckle armor and the CE stamp
Hard knuckle guards spread the force of an impact across the back of your hand. The CE mark to look for is EN 13594, and the “Level 1 KP” rating tells you the glove passed a standardized abrasion and impact test. Not every glove here carries it, and for fair-weather commuting you may not care. For highway riding, it is the clearest safety signal on the spec sheet.
Cuff length decides whether rain runs in
A short cuff sits at the wrist and looks tidy, but water running down your jacket sleeve can funnel straight into the opening. A gauntlet cuff extends up the forearm and closes with a drawstring or strap, so the glove overlaps your sleeve instead of the other way around. Match the cuff to your jacket: gauntlet over the sleeve for wet climates, short cuff tucked under a snug sleeve for milder weather.
Side-by-Side Comparison
| Model | Best For | Waterproofing | Knuckle Protection | Weight | Amazon |
|---|---|---|---|---|---|
| BORLENI Winter Gloves CE★ Best Overall | Best Overall | Waterproof & windproof shell | Carbon fiber knuckle | 0.2 kg | Amazon |
| IRON JIA’S Winter Gloves CECertified All-Rounder | Certified all-rounder | Four-layer with waterproof layer | Hard-shell guards (EN 13594 L1 KP) | 0.24 kg | Amazon |
| KEMIMOTO Winter WarmBudget Rainproof | Budget rainproof | 4-layer waterproof layer | Hard PVC shield | — | Amazon |
| INBIKE Winter Gloves | Cold-morning commuting | Water-resistant shell + inner membrane | Hard knuckle + TPR palm pad | 8.48 ounces | Amazon |
| JAUNTY Winter Gloves | Leather feel, wet weather | Leather shell + inner waterproof membrane | Carbon fiber knuckle | 0.24 kg | Amazon |
| Milwaukee Leather SH815 | Cruiser gauntlet style | Waterproof cowhide gauntlet | Hard knuckles and fingers | 15.2 ounces | Amazon |
| KEMIMOTO Tactical Gloves | Multi-sport cold weather | Waterproof membrane, 4-layer | Hard PVC shell | — | Amazon |
| Alpinestars SMX Z Drystar | Premium breathable wet-weather | Drystar waterproof, breathable | CE standard | 204 g | Amazon |
| KLIM Adventure GTX Short | Top-tier touring | Gore-Tex + Gore Grip | Carbon fiber knuckle over Poron XRD | — | Amazon |
Detailed Reviews
1. BORLENI Winter Motorcycle Gloves
Our pick — 4.5+★ from 4,000+ verified ratings; the strongest balance of quality and price.
Carbon-knuckle armor and a sealed shell at a weight that barely registers on your bars.
What sells the BORLENI is the armor-to-weight deal. It carries carbon fiber knuckle protectors across the back of the hand — a hard shell that spreads impact rather than letting it jab straight into bone — and still comes in at 0.2 kg. That is 0.04 kg lighter than the IRON JIA’S pair that also carries CE certification, and on a long ride you feel that difference in how quickly your hands tire. The build is certified Level 1 KP under EN 13594, the EU standard for motorcycle glove impact and abrasion protection.
The shell is built to keep wind and rain out, and the palm gets anti-slip patches so your grip stays planted on a wet bar. Straps at the wrist adjust for a snug seal and double as a way to hang the gloves off a backpack or mirror. The index fingertip carries a conductive fiber patch, so you can tap your phone or navigation without peeling a glove off in the cold. It is a unisex adult design that also suits ATV, mountain bike, hiking and snow-shoveling duty.
Here is the honest part. The fit runs long in the fingers for some riders, and water resistance is not absolute in a sustained downpour — a few buyers report dampness and cold fingers in genuine winter wet. Treat these as excellent all-round cold-weather gloves rather than a monsoon-only gauntlet. Quality is what wins people over, and it is the most-praised trait by a wide margin, so the build itself rarely disappoints.
Where These Gloves Earn Their Keep
- Carbon fiber knuckle protection with a CE EN 13594 Level 1 KP stamp at just 0.2 kg.
- Touchscreen fingertip keeps navigation reachable without bare hands in the cold.
- Adjustable wrist straps seal the cuff and give you a hang point on the bike.
- Unisex build crosses over to ATV, MTB, hiking and snow work.
What To Weigh Before You Buy
- Fingers can run long, so check the size chart carefully before ordering.
- Water resistance holds up in normal rain but not a sustained soaking.
- Some riders still feel cold fingers in deep winter temperatures.
Reach for these if: you want certified knuckle armor, touchscreen access and a genuinely light glove for year-round wet-weather commuting.
Look elsewhere if: you ride through monsoon-level downpours or need the warmest liner in the lineup for sub-freezing mornings.
2. IRON JIA’S Winter Motorcycle Gloves, CE-Certified (EN 13594)
Four layers, a 3M insulation blanket and a visor wiper built into the finger.
IRON JIA’S goes warmer and more armored than the BORLENI, and it charges a little weight for it — 0.24 kg versus 0.2 kg on the winner. You get a four-layer stack: a fleece lining against your skin, a 3M insulation layer, a waterproof layer, and an outer shell. That insulation layer is the same stuff sold as 3M Thinsulate-style fill, and it is there to hold your body heat in during cold commutes.
Protection is certified to EN 13594:2015 Level 1 KP, with hard-shell guards over the knuckles and extra protective detailing on the fingers. The palm is reinforced and textured to grip the bars, and the extended cuff adds coverage up the wrist. A finger-mounted visor wiper clears rain droplets from your helmet visor without you lifting a hand off the bar — a small thing that makes a wet ride noticeably less annoying. Touchscreen tips on the thumb and index finger let you check navigation when safely stopped.
Two things buyers should know. The thumb area runs tight, and some riders report the overall sizing is inconsistent — measure your hand and follow the chart rather than guessing. Water resistance is solid in ordinary rain but not a sealed monsoon shell, so tuck the cuff under your jacket sleeve. What earns this pair its place is plain value: the build and the money-to-quality ratio are the two things riders praise most about it.
what separates it: You get a complete cold-weather package: 3M insulation (a synthetic layer that traps warmth) plus full CE EN 13594:2015 Level 1 KP certification (a European safety standard for motorcycle gloves with impact protection), all at 0.24 kg. The extended cuff covers your wrist, and the built-in visor wiper clears your helmet shield in rain.
The trade-off to note: hand-wash only, and the thumb runs snug, so thin-fingered riders may want to size up.
Best matched to: commuters who want certified armor, real insulation and a visor wiper in one glove without stepping into premium territory.
Think twice if: you need a dialed-in precision fit straight out of the bag or you ride in constant heavy rain.
3. KEMIMOTO Winter Warm Motorcycle Gloves
A four-layer rainproof shell for riders who just want dry hands on the daily commute.
KEMIMOTO keeps the recipe simple: polar fleece lining, a cotton lining, a waterproof layer and a windproof layer, all stacked into one glove. That is four layers doing the job of keeping water out and warmth in. The elastic band at the cuff holds the seal against wind, and the palm side is abrasion-resistant microfiber that gives you a solid grip on the speed and brake controls.
The back of the hand gets a hard PVC shield over the joints — plastic armor that takes the first hit if you go down. Two fingers, the forefinger and thumb, are made from conductive touchscreen leather, so you can work a phone or navigation unit without removing the glove. Sizing runs to X-Large, and the glove crossovers to ATV, UTV, snowmobile, cycling and general winter work.
Buyers consistently call out the quality and the warmth, and for a rainproof glove at this tier that is the whole point. The catch is the sizing — it is sized X-Large and runs its own way, so measure before you commit. There is no CE stamp here, so if certified impact protection is non-negotiable, look at the two picks above instead.
Go with it when: dry, warm hands on a wet daily commute matter more than a certification stamp.
Pass it up if: you need CE-rated knuckle armor or a precision fit across the whole hand.
4. INBIKE Waterproof Winter Motorcycle Gloves
Shock-absorbing palm padding aimed at riders who feel every bump through the bars.
What INBIKE does differently is the palm. A TPR pad — a rubbery shock-absorbing insert — sits in the palm, backed by a thickened microfiber patch across the palm and fingers for extra wear resistance. The joint area uses EUDE FOAM, a cushioning material that dampens vibration, so long stretches of rough road do not rattle straight up your arms. Warmth comes from a polyester and microfiber shell over a soft fleece lining, and the stretchy cuff pulls the glove snug to your hand.
Water protection is a two-part setup: an outer water-resistant shell plus an inner waterproof membrane doing the real sealing. The index finger carries touchscreen-friendly microfiber, so you can tap a device without exposing bare skin to freezing wind. A hook-and-loop cuff strap lets you dial in the fit, and a pull tab at the wrist helps you yank the glove on or off with cold, stiff fingers.
Riders who ride in roughly 40-degree weather report the gloves working well, and comfort and quality are the recurring notes. Warmth is the split point — some find it keeps fingers from chilling to the bone, others find it too warm in milder weather. The weight is 8.48 ounces, which is a sturdier-feeling glove than the lighter options above.
The reason to pick it: TPR palm cushioning plus EUDE FOAM at the joints is a real answer to vibration fatigue that most gloves in this tier skip entirely.
The honest caveat: the inner membrane keeps water out but can make the glove feel warm fast, so it is at its best in true cold.
The right fit for: riders logging cold-weather miles on buzzy or rough roads who want palm and joint cushioning to protect their hands.
Not the one if: you want a lighter, more ventilated feel or you mostly ride in mild temperatures.
5. JAUNTY Winter Motorcycle Gloves
Genuine leather and silicone grip for riders who want feel, not bulk.
JAUNTY starts with a water-resistant genuine leather and softshell outer, then layers an inner waterproof membrane and a thermal lining underneath. Rain and road spray stay out, body heat stays in, and the wind-blocking shell does the same job for driving or shoveling snow. The carbon fiber knuckle guard is shaped so you can still close your fist around the grip and work the levers — armored, but not stiff like most armored winter gloves.
Grip is where this glove earns trust. Anti-slip silicone gel printing runs across the palm and fingers, so your hands do not creep on a wet grip, and the hook-and-loop wrist strap cinches down to seal out cold air. A pull tab makes it easy to pull the gloves on and off with cold fingers. Conductive microfiber on the fingertip lets you answer a call or pay at the pump without baring your hand to the wind. Sizes run Small through 3X-Large for men and women, and it is at 0.24 kg.
Warmth and fit are the two mixed notes — some find it plenty warm, others say fingers still get cold, and the inner lining can feel tight. Measure your hand and check the size chart, and size up if you have wide hands or plan a liner. Hand-wash only, because machine drying can damage the waterproof membrane.
Pick it if: you want leather feel, silicone grip and a carbon fiber knuckle without the stiff, bulky armor feel.
skip it if: you want the warmest liner in this group or you have wide hands and do not plan to size up.
6. Milwaukee Leather SH815 Gauntlet Gloves
Full-grain cowhide and a long gauntlet built to swallow your jacket sleeve.
This is the old-school answer to wet riding. The shell is full-grain black cowhide — impermeable leather that only softens with use and holds its durability over time. Inside sits a thermal-lined fabric that traps heat, and the double-layered leather construction adds another shield against the cold. The long gauntlet cuff extends up the forearm with a drawstring at the edge, so the glove overlaps your jacket sleeve and rain does not run straight down into the wrist.
Hard knuckles and hard-backed fingers handle the impact side, and an elasticized palm gives you a secure grip and a bit of give for knuckle comfort on the back of the hand. A wrist strap and cinch closure let you lock in a snug fit. These are 15.2 ounces — the heaviest ride in this lineup — and that thicker leather is exactly why riders reach for them on a frigid morning.
The one thing to plan around is sizing: these run small for several riders, so order a size up if in doubt. Otherwise the warmth and comfort are what this pair is known for, and the cowhide keeps on softening as you wear it in.
What you gain: a genuine full-grain leather gauntlet with a drawstring cuff, hard knuckles and a thermal lining — a weather wall for cold street and cruiser riding.
Where it costs you: 15.2 ounces of leather demands a bit more wrist effort, and the sizing runs small enough that you should size up.
Suits you if: you ride a cruiser and want classic leather gauntlet protection that blocks wind and rain at the cuff.
Better to pass if: you want a lightweight tactile glove or a stretch fit right off the shelf.
7. KEMIMOTO Tactical Gloves
Three touchscreen fingers and a PVC shell for riders who jump between bikes and gear.
The standout here is the fingertip count. Three fingers — thumb, index and middle — are touchscreen compatible, versus the two-finger setups on most gloves in this list. That matters when you are wearing thick winter gloves and tapping a phone through a screen; a middle finger that responds gives you far more control. The rest of the build is four layers: breathable polyester and microfiber shell, 5mm high-efficiency cotton fill, a waterproof membrane, and a soft velvet lining against the skin.
Protection comes from a hard PVC shell across the back of the hand, plus a thickened palm pad with an anti-slip design to keep your grip sensitive in wet or cold conditions. The hook-and-loop closure locks the wrist down. It crossovers to tactical training, airsoft, paintball, hunting, hiking and skiing, so it is a glove you can wear well beyond the bike.
Riders say it handles 30-50°F weather on a motorcycle, which is a genuinely useful range for fall and winter riding. Warmth is the split point — some find it great in cooler weather, others find it cold, so treat it as a shoulder-season glove rather than a deep-winter one. Quality, fit and comfort are the strong notes.
Choose this if: you want a do-everything cold-weather glove with three touchscreen fingers and a hard shell for riding plus tactical or outdoor use.
Look past it if: you ride in the deepest cold or want a motorcycle-only fit rather than a multi-purpose one.
8. Alpinestars SMX Z Drystar Gloves (Large) (Black)
The breathable-waterproof glove for riders who hate clammy hands inside a rain shell.
Alpinestars sticks to a focused brief. The Drystar construction is a breathable waterproof layer — it blocks rain from getting in while letting moisture from your hand escape, so you do not end up with a wet, stuffy glove from the inside. The upper is polyester and the palm is leather, giving you a durable grip surface against the controls. It is CE standard certified and carries smartphone touch compatibility so you can tap a screen without removing the glove. Weight lands at 204 g.
Where this glove separates from the budget crowd is the breathability pairing. A sealed membrane that traps heat can turn your hands clammy on a warm wet ride; a breathable Drystar layer is designed to avoid that. The leather palm also adds a refined feel on the bar that all-synthetic shells cannot match.
Know what you are buying. The listing gives few armor details — no knuckle-shell callout like the carbon and PVC guards on the picks above — so if you want visible hard armor, look to the IRON JIA’S or KLIM instead. This is a breathable rain glove first and an armored winter glove second.
The draw: Drystar breathable waterproofing plus a leather palm and CE certification at 204 g — a lightweight, refined wet-weather glove.
What to expect: minimal hard-armor detail in the listing, so treat it as a finesse glove rather than a heavy armored gauntlet.
Best for: fair-weather-to-wet riders who ride through rain but hate a stuffy, sweaty glove and prefer a leather palm feel.
Not for: riders who want a visible hard knuckle guard or maximum winter insulation.
9. KLIM Adventure GTX Short Men’s ADV Motorcycle Gloves
Gore-Tex guaranteed-dry construction for adventure riders who tour through anything.
The main feature is the membrane (a thin waterproof layer inside the glove): Gore-Tex with Gore Grip, which the maker states is guaranteed to keep you dry. Gore Grip bonds the membrane to the glove shell so the layers do not slide against each other — the result is more control on the bar and no bagging under your fingers. Under the carbon fiber knuckle sits a Poron XRD palm protector (a shock-absorbing material that spreads impact force instead of letting it concentrate).
KLIM also builds in the adventure-riding details. Mult-E-Touch functionality keeps smart devices usable without baring your hand, a moisture-wicking liner pulls sweat away from your skin, and 3D silicone finger pads add grip on the levers. Ceramic print in the slide areas adds abrasion resistance where a glove tends to wear first — the exact spots that touch down in a low-speed spill.
Build quality is the thing that lands with this glove. Fit is the honest caveat, so dial in your size carefully before ordering. If your riding means long days through uncertain weather and you want a short-cuff ADV glove that will not quit on you, this is the top of the ladder.
Why it tops the range: a Gore-Tex guaranteed-dry membrane with Gore Grip bonding, a carbon fiber knuckle over a Poron XRD palm protector, and ceramic print at the wear zones — proper touring hardware.
The fit note: sizing divides buyers, so a careful measure-and-match to the chart is worth the two minutes.
This is your glove if: you tour through unpredictable weather and want guaranteed-dry Gore-Tex construction with real armored protection.
The money goes elsewhere if: you want a light glove for short mild rides or you are not going to nail the fit.
Know the Specs
Waterproof Membrane versus Water-Resistant Shell
A membrane is a thin sealed layer stitched between the inner lining and the outer shell. It blocks liquid water while letting sweat vapor pass, which is why gloves built around one feel drier both outside and in. A water-resistant shell is just a coating on the outside fabric — it shrugs off drizzle and spray, then soaks through in steady rain. When a listing names a specific membrane or a layered build, that is the stronger signal. When it only says “water-resistant,” budget for a wet ride.
CE Certification and EN 13594 Protection
EN 13594 is the European standard for motorcycle gloves, and “Level 1 KP” is the entry protection grade under it. Passing means the glove survived a set abrasion and impact test, and the KP tag typically covers knuckle protection. A hard knuckle guard — carbon fiber, PVC, or a polymer shell — spreads impact instead of letting it hit one point. You will see this certification on some picks and not others. For highway riding, it is worth checking; for gentle town riding, comfort and warmth matter more.
Insulation and Lining Materials
Warmth comes from trapped air, so the fill and lining layers matter more than shell thickness. Synthetic fills like 3M insulation, cotton, or fleece linings hold a layer of warm air against your fingers, and the count of layers tells you how seriously the glove is built for cold. A four-layer build usually means fleece or velvet against your skin, a fill, a membrane, and the outer shell. A soft fleece lining feels better against bare hands, while a moisture-wicking liner helps if you run hot. Match the layer count to your climate: a four-layer build for sub-40°F commutes, a lighter fleece lining for milder wet rides.
Touchscreen Fingertips and Grip
Conductive material on the fingertips lets the heat of your finger register on a capacitive phone screen through the glove. One finger is the minimum; two fingers (thumb and index) cover navigation and calls; three fingers give you the most control. On the grip side, look for anti-slip patches — silicone printing, rubberized inserts or a textured microfiber palm — on the palm and fingers. On a wet bar, a slick palm loses you lever feel fast, so silicone printing or a textured microfiber palm matters as much as the membrane.
Common Questions
Will these waterproof gloves keep my hands dry in a heavy downpour?
Are these gloves warm enough for freezing temperatures?
What does the CE EN 13594 certification actually mean on a motorcycle glove?
Can I use my phone without taking these gloves off?
How do I know my glove size before ordering?
What is the difference between a short cuff and a gauntlet cuff glove?
Can I wash waterproof motorcycle gloves in a machine?
Are knuckle guards worth having on a wet-weather glove?
Do leather gloves keep my hands dry in the rain?
Which glove is best for breathability on warmer wet rides?
The Bottom Line
The strongest waterproof motorcycle glove here is the BORLENI Winter Gloves CE, and it earns that spot on a rare combination: carbon fiber knuckle armor, a CE EN 13594 Level 1 KP stamp (a European safety standard for impact protection), touchscreen access and a sealed shell at just 0.2 kg. At 0.2 kg it is the lightest CE-certified glove here, and that 0.04 kg edge over the IRON JIA’S pair shows up as less hand fatigue on long cold rides. If you want certified armor plus a genuine 3M insulation layer and a built-in visor wiper, the IRON JIA’S CE-Certified gloves are the build for you. And for adventure touring through unpredictable weather, the KLIM Adventure GTX Short with its Gore-Tex guaranteed-dry membrane is the one to reach for. Whichever you pick, measure your hand against that brand’s size chart and hand-wash in cool water — machine drying can break down the waterproof membrane.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





