Women’s Long Leather Jacket Sizing Guide: How to Get the Right Fit

Long leather jackets fit correctly when shoulder seams land on the shoulder bone and the measured back length, not the label, reaches your intended hem.

Letter sizes lie. A medium from one brand can run a full size smaller than a medium from the next, and “long” means something different on nearly every product page. What doesn’t lie is a tape measure and the specific brand’s own chart.

The right women’s long leather jacket comes down to five body measurements compared against that brand’s numbers, plus one honest decision about what you plan to wear underneath. This guide walks the measurements, the layering math, and the mistakes that send jackets back to the warehouse.

What To Measure Before You Open A Size Chart

Measure five places — fullest bust, widest waist or stomach, shoulder-to-shoulder across the back, shoulder edge to wrist, and collar to desired hem — and write them down before comparing anything.

Keep the tape level and relaxed; a cinched tape reads small and steers you into a jacket that won’t close. For the bust, measure at the fullest point with arms slightly raised. For the waist, use the widest part, usually near the belly button. Shoulders go from the outer edge of one shoulder across the back to the other. Sleeve length runs from that same shoulder edge to the wrist. Jacket length runs from the collar straight down to where you want the hem to sit.

Two numbers do the real work on a long jacket: shoulder width and back length. Shoulders are the hardest thing to alter on leather, so a seam that sits off the shoulder bone is a permanent problem, not a tailoring fix. Back length decides whether “long” actually means mid-thigh or knee on your frame.

Body Measurements vs. Garment Measurements

Most brand charts list body measurements, not the finished jacket, and confusing the two is the single most common sizing error. IKKS states plainly that its figures are body measurements and that actual garment length and width vary by style.

That means the chart tells you what body the jacket is cut for, not the jacket’s own dimensions. A 38-inch bust on a chart means “fits a 38-inch bust,” and the finished garment will carry ease on top of that. When a product page also lists flat-lay garment measurements, trust those for length questions and use the body chart for width.

Published numbers differ wildly between manufacturers, so no XS–XL scale is universal. One women’s chart lists bust/stomach pairs running XS 32/30 inches up through 6XL 50/48. A separate US-oriented outerwear chart gives XS US 4 at 33–34 inches of bust and XXXL US 16 at 47–49. Same letters, different bodies — which is why the tape measure beats the label every time.

Size Bust / Stomach (in.) Watch For
XS 32 / 30 Fitted bikers; no room for thick knits
S 34 / 32 Light layering only
M 36 / 34 Standard sweater fits comfortably
L 38 / 36 Good for chunky knitwear
XL 40 / 38 Layering plus movement room
2XL 42 / 40 Check shoulder width closely
3XL 44 / 42 Confirm sleeve length separately

Zadig & Voltaire advises taking your usual size for a fitted biker or bomber, sizing up for chunky knitwear or a relaxed look, and checking the measurements on each product page rather than assuming.

Layering Room And Leather Behavior

Measure over the clothing you’ll actually wear under the jacket — a thin tee gives you a number that fails the moment a sweater goes on. If the jacket is cold-weather gear, measure in a sweatshirt or thermal layer and size to that result.

Leather also moves. Zadig & Voltaire notes that lambskin gives slightly as it wears, so a fitted style shouldn’t be bought excessively tight — but it also won’t stretch enough to rescue a jacket that can’t close. When the measurements land between two sizes, take the larger one for a long coat meant for layering and the smaller one only for a biker worn over a tee.

Once your numbers are set, it helps to see which specific long styles actually run true — our tested women’s long leather jacket picks list the back lengths and shoulder measurements for each.

Long, Tall, And Petite: What “Long” Really Means

A tall or long jacket is typically defined as 2 inches longer in both body and sleeve, generally aimed at women 5 feet 8 inches or taller — but torso and arm proportions can override height entirely, so verify the actual back length instead of trusting the word “long.”

Published charts sometimes split short, regular, and long back-length columns, which proves length options vary independently of chest size. Check that the hem reaches your target without restricting walking or sitting, and confirm sleeve length on its own. Petite frames with long torsos and tall frames with short torsos both exist, and each one breaks the height rule. Zadig & Voltaire’s product pages are worth reading for this reason — they publish measurements per style. The same holds across the IKKS leather jacket size chart and measuring guidance, which notes that its general figures are guides only.

The Sizing Mistakes That Cost You A Return

Most wrong-size orders trace back to one of six errors:

  • Treating XS–XL or US numeric sizes as universal when charts differ by manufacturer.
  • Measuring only the bust and skipping shoulders, sleeve length, waist, and hem position.
  • Measuring over a thin shirt when the jacket will go over sweaters or insulated layers.
  • Sizing up for extra sleeve or body length without checking that shoulder width still fits.
  • Assuming you need a tall size purely because of height, when proportions matter more.
  • Confusing body measurements with garment measurements — a chart of your body is not a chart of the jacket.

Order by shoulder width first, layering-adjusted torso second, back length third. If two brands disagree on the same letter size, believe the tape measure and the brand’s own chart every time.

Common Questions

Should I size up in a long leather jacket?

Size up if you plan to wear sweaters or thick layers underneath, or if your measurements sit between two chart sizes. For a fitted biker worn over a tee, take your usual size. Lambskin gives slightly with wear, so avoid buying excessively tight.

How do I know if a jacket’s back length is right for me?

Measure from your collar straight down to where you want the hem to land, then compare that number to the product’s listed back length. Drawn-up charts sometimes split short, regular, and long back lengths. Never assume “long” means the same measurement across brands.

Where should the shoulder seam sit on a leather jacket?

The seam should meet the outer edge of your shoulder bone. If it extends noticeably past that point, the jacket is too wide through the shoulders — and leather shoulders are expensive to alter, so fix that at the sizing stage rather than the tailor.

Sources

Scroll to Top