Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Buying a WRX body kit is mostly a fitment decision, not a style decision. The right kit bolts to your exact chassis with no drilling and clears the first steep driveway. The wrong one arrives unpainted, needs trimming, and cracks the first time a speed bump catches it. This guide sorts the five kits worth your attention by generation, material, and how much work the install actually takes.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You will see which kits protect the factory bumper, which ones change the stance, and where PU, PP, or ABS decides whether your kit survives a curb strike. Read on for the smartest way to shop a wrx body kit.
Top Picks


How To Choose The Best WRX Body Kit
Start with your car, not the kit. A body kit cut for a 2004 STI will not sit flush on a 2018 WRX, and no amount of tape fixes a two-generation gap. Every product below names its year range for a reason — check yours before you read another word.
Match the kit to your chassis code
Subaru changed the Impreza/WRX platform several times, and the internet shorthand for those platforms is a chassis code such as GD. The 2002-2009 cars are one family. The 2008-2014 cars are another. The 2015-2021 cars are a third. A side skirt built for one family will not clip onto the next, so the year range on the listing is your first filter, not a footnote.
Understand the material before you buy
Three plastics show up in this category and they behave very differently. ABS (acrylonitrile butadiene styrene — a stiff, molded plastic) holds a molded shape and takes paint cleanly but is the least forgiving of a hard hit. PP (polypropylene) is a slightly more flexible plastic that bends a little further before it gives up. PU (polyurethane) is the rubbery one — it flexes the most and takes scrapes best.
Decide whether you are painting or running raw black
Most kits ship unpainted raw black, which is a matte, unfinished plastic finish. That is fine if you like the contrast look on a dark car, and it is the cheapest path to an installed kit. If you want the parts to match your paint, budget for a body shop prep and spray on top of the part.
Check what is actually in the box
A “9-piece kit” and a “pair of side skirts” are very different purchases. Read the included-components line: some kits give you the front lip, the splitter, and the mounting hardware, while others give you a single lip and expect you to source screws. Hardware in the box is the difference between a Saturday morning job and a week waiting on a parts order.
Side-by-Side Comparison
| Model | Best For | Fits (Years) | Material | Pieces Included | Amazon |
|---|---|---|---|---|---|
| IKON MOTORSPORTS MP Style Front Bumper Lip★ Best Overall | Best Overall | 2015-2021 WRX & STI | ABS | 1x front lip + hardware | Amazon |
| IKON MOTORSPORTS PP Side Skirts CS StyleBest Value | Best Value | 2002-2007 Impreza | Polypropylene (PP) | 1 pair side skirts | Amazon |
| Q1-TECH 9-Piece Front Lip & Side Skirt Kit | Most Complete | 2015-2021 WRX STI Sedan | ABS | 9 pieces (3 front + 6 side) | Amazon |
| MCARCAR KIT Wide Wheel Arch Fender Flares | Best Wide-Body Look | 2002-2009 WRX STI (GD) | PU | Fender flare set + tape | Amazon |
Detailed Reviews
1. Subaru WRX STI Front Bumper Lip MP Style
Our pick — 4.0+★ from 150+ verified ratings; the strongest balance of quality and price.
The lip that drops the whole front end without dropping your ride height.
This is the pick for the VA-generation owner — the 2015 through 2021 WRX and STI sedan — who wants the front end to read lower and meaner without touching the suspension. IKON MOTORSPORTS builds it as a direct-fit part for Base, Premium, Limited, Sport, Sport-Tech and STI trims, and it is injection molded so it lands on the bumper without trimming. It weighs 2.8 pounds, which is light enough that the nose does not feel loaded down.
The material is ABS, a stiff molded plastic that holds its molded MP-style shape and takes paint cleanly if you ever decide to color-match it. It ships unpainted black with a UV-protected clear coat, so it resists fading and you can bolt it on the same weekend it arrives. Pre-drilled holes and the included mounting hardware mean the install is a screw-in job rather than a drill-and-hope job. Speed bump protection is the practical side benefit: the lip takes the scrape instead of your factory bumper.
You can install it yourself, but it is not tool-free — you are driving screws into a bumper, and the manufacturer recommends professional installation if that makes you uneasy. The other thing to plan for is finish: unpainted black will not match a painted car, so budget a paint shop visit if you want a smooth look. Neither is a flaw in the part; they are just the two jobs to plan for.
What earns the top spot
- Direct fitment across the full 2015-2021 WRX and STI range, so you are not guessing on trim
- Pre-drilled holes and included hardware cut the install down to a screw-in job
- UV-protected clear coat resists fading on an unpainted part left in the sun
- At 2.8 pounds it adds the look without weighing down the front end
Where it asks something of you
- ABS is the stiffest of the three plastics here — a hard curb strike is less forgiving
- Ships unpainted, so a color-matched look means paying a body shop
- You are driving screws into your own bumper, which the maker says is best left to a pro
Reach for this if: you own a 2015-2021 WRX or STI and want a bolt-on front lip that changes the look the same weekend.
Look elsewhere if: you want paint from day one or you drive roads that regularly hand out hard front-end hits.
2. Subaru Impreza WRX STI Side Skirts CS Style
A bolt-on pair for the bug-eye and blob-eye cars that reshapes the rocker line.
Owners of the early GD cars are the tightest fitment market in this whole category, so a side skirt that names 2002-2007 Impreza and is a true bolt-on job is worth knowing about. This pair from IKON MOTORSPORTS is made from PP (polypropylene), a moderately flexible plastic that bends a little further before it gives up than stiff ABS. It weighs 4.5 pounds. Put that against the 2.8-pound ABS front lip above and you feel the extra material — 4.5 pounds versus 2.8 — but side skirts carry a pair of panels, so the number tracks the job.
The CS-style extension adds the sporty lower line without lowering the side height of the car, which matters if you park in a garage with a lip or use steep ramps. It also does a protective job: the rocker panel takes the chip damage instead of your painted factory skirt. Everything you need to mount it is in the box, and it is a bolt-on part.
The catch here is paperwork, not plastic. This is an aftermarket part and the manufacturer does not include installation instructions. If you have not hung side skirts before, budget for a shop to fit them. Fitment is also specific: the listing calls for STI factory side skirts as the base on both the STI and non-STI 2002-2007 cars, so confirm yours are present before ordering.
The fitment question to answer first: the manufacturer’s compatibility line names 2004-2007 Impreza STI and 2002-2007 Impreza non-STI, with STI factory side skirts required on both. That is the single check that decides whether this pair fits your car.
What you get for the money: a genuine bolt-on pair in PP, all mounting hardware included, and a finish that ships unpainted black so you can run it as-is or paint later.
Yes, if: you run an early GD Impreza and want a hardware-complete side skirt pair you can bolt on.
Not for you if: you need step-by-step instructions in the box or your car is missing the factory STI side skirts this kit builds on.
3. Q1-TECH Front Bumper Lip & Side Skirt Extensions
One box, nine pieces, and a full aero look bolted on in a single afternoon.
If you want the whole lower body transformed rather than one panel at a time, this is the kit that does it. You get a 3-piece front bumper lip plus a 6-piece side skirt extension and diffuser set, so the front and both rockers change together instead of in stages. It is built for the 2015-2021 WRX STI sedan — the VA generation — and it comes painted in a carbon finish, so you are not looking at raw black plastic from the start.
You pick the length that matches how far you want the lower line to run: the side skirt extensions come in 59 x 4 inches or 86 x 4 inches, and the maker describes them as flexible. Softer material matters here because a long splitter catches more driveway edges, and the ABS (a tough, slightly flexible plastic) is described as very flexible and crack-resistant. Screws and nuts are included, and the install is a screw-in job.
Two things to weigh. The fitment line names the WRX STI sedan specifically, so a standard 2015-2021 WRX buyer should double-check trim before ordering. And the protection this kit offers is scrape protection for the factory bumper, not a crash barrier — it takes the driveway kiss so your painted bumper does not.
The all-in-one argument: buying a front lip and a side skirt pair separately gets you two boxes, two installs, and a chance the finishes do not match. This kit arrives as nine pieces with one finish and one hardware set.
The honest trade-off: a painted carbon finish and a nine-piece layout ask more of the install than a single lip, and the diffuser extensions run long enough that driveway clearance is worth checking before you commit.
Built for: the 2015-2021 STI sedan owner who wants the front and both sides done in one purchase.
Walk on by if: you drive a non-STI WRX and cannot confirm the sedan trim line matches, or you would rather change one panel and judge the look first.
4. MCARCAR KIT Wide Wheel Arch Molding Fender Flare Kit
Pump up the rear arches without drilling a single hole in your fenders.
Fender flares are the piece that turns a GD-chassis Impreza into a wide-body car, and this set from MCARCAR KIT is the one that does not ask you to drill. It is built for the 2002 through 2009 WRX STI on the GD chassis code — that is the early Impreza family — and it mounts with free glue tape rather than screws. If you have ever priced out a hole you cannot un-drill in a painted quarter panel, the no-drill install is the whole case for this kit.
You get a wide-arch silhouette at the rear without loading the car down: the flares are smooth PU (a rubbery plastic that flexes rather than shattering) and weigh 1.02 kg. The styling job is the point — the maker describes them as adding visual impact and a sporty look that sets the car apart from similar models. On a GD car, the arch line is the biggest change you can make to the profile.
The trade-off is adhesion and finish. Tape-mounted parts depend on a clean, dry, properly prepped surface, and the listing does not promise a primer or adhesive promoter in the box. It also ships in black PU rather than paint-matched, so on a colored car the contrast is part of the look. Plan a careful prep and a warm dry day for the install.
Why wide-arch buyers pick it: it is the only rear-arch piece on this list, it covers the 2002-2009 GD range, and the glue-tape install keeps your quarter panels intact.
Plan for this: tape adhesion lives or dies on surface prep, so budget time to clean and dry the arch properly before you press the flares on.
One detail worth confirming: the listing names the GD chassis 2002-2009 range, so a later-generation WRX needs different parts entirely.
The right buy for: a GD-chassis 2002-2009 WRX STI owner chasing the wide-body silhouette with no drilling.
Keep looking if: you own a VA-generation car or you want a painted, permanent bolt-on fix rather than an adhesive one.
Know the Specs
Plastic type: PU vs PP vs ABS
PU (polyurethane) is the most flexible and takes scrapes best. PP (polypropylene) sits in the middle — more give than ABS but less than PU. ABS is the stiffest and holds a molded shape with the cleanest paint finish. For a low part like a side skirt or front lip, flexibility is your protection against real roads.
Chassis generation and year range
Subaru changed the Impreza and WRX platform several times. The 2002-2009 cars are the GD family, 2008-2014 is a separate fitment, and 2015-2021 is the VA generation. A kit built for one family will not sit flush on another, so the year range on the listing is the first filter you check.
Unpainted raw black vs painted finish
Unpainted raw black is matte, unfinished plastic — cheaper, faster to install, and it gives a contrast look on a dark car. A painted finish like carbon means no body shop trip but a higher upfront cost. Neither is better; it depends on if you want to paint later.
What “included components” tells you
The included-components line tells you exactly what arrives: one lip, a pair of skirts, or a nine-piece set. It also tells you whether screws and nuts are in the box. A kit with screws and nuts included saves you a trip to the hardware store; a part without them can sit in the garage for a week.
Common Questions
Will a 2015-2021 WRX front lip fit my 2013 WRX?
Do I need to paint an unpainted black body kit?
Is PU better than ABS for a WRX body kit?
Can I install a body kit myself without a body shop?
Does a front lip protect my bumper or just change the look?
What do the GD and VA chassis codes mean for fitment?
Will side skirts lower my car and make it scrape more?
Do fender flares need drilling?
Are body kit parts covered by a warranty?
Can I mix a front lip from one maker with side skirts from another?
The Bottom Line
For most WRX owners, the best wrx body kit pick is the IKON MOTORSPORTS MP Style Front Bumper Lip, because it is a true direct fit across the whole 2015-2021 range and it installs with pre-drilled holes and included hardware. Own an early GD Impreza and want a hardware-complete side skirt pair? Grab the IKON MOTORSPORTS PP Side Skirts. And if you have a VA and want the front and both sides transformed in one order, the Q1-TECH 9-Piece Kit is the one to reach for.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

