WRS321SDHZ is a Whirlpool side-by-side refrigerator model, not a filter cartridge, and it uses Whirlpool’s EveryDrop filtration system with an EDR1RXD1 replacement filter.
The confusion is understandable: the WRS321SDHZ label sits next to the dispenser, and the filter lives in that same housing.
Is WRS321SDHZ the Filter or the Refrigerator?
WRS321SDHZ is the refrigerator: a 33-inch-wide side-by-side with 21.4 cubic feet of total capacity; the filter is a separate cartridge that slides into the exterior dispenser.
Full specs, per Whirlpool’s product page:
- Height: 66.625 inches (66.25 inches to the top of the door hinge)
- Width: 32.75 inches; depth: 33.75 inches, or 49.313 inches with the door open 90 degrees
- Freezer range: −5°F to +5°F; refrigerator range: 33°F to 45°F
- Dispenser: dual-pad exterior ice and water with a filter-change indicator
The filter indicator is the one part of this system Whirlpool actively signals: when it trips, you replace the cartridge — no guessing about timing.
Which Filter Fits the WRS321SDHZ?
Whirlpool’s comparison page lists EDR1RXD1 as the compatible filter, while its owner-center listings sell WHR1RXD1, labeled “Whirlpool Refrigerator Water Filter 1.” Both point to the same cartridge family — and the dual numbering is the biggest source of wrong purchases here. Check the sticker inside the dispenser housing or the model/serial tag inside the refrigerator compartment, and match it against Whirlpool’s support lookup for your exact revision.
Treat those as Whirlpool’s listed prices, not universal retail ones.
To compare genuine Whirlpool cartridges against compatible third-party options, our tested WRS321SDHZ filter roundup lays out fitment and cost differences side by side.
What Does the Filter Actually Remove?
Whirlpool’s public product material does not list any contaminant-reduction claims for EDR1RXD1 or WHR1RXD1 — no certified removal list, no rated capacity, no NSF/ANSI certification details, and no flow-rate specification.
That absence matters: any article promising this cartridge strips lead, cysts, or pharmaceuticals is working from the performance data sheet, not the refrigerator listing — or guessing. The defensible statement is narrower: the WRS321SDHZ dispenses water through an EveryDrop filtration system mounted in the exterior dispenser, and Whirlpool’s public pages stop there. To get the removal list, pull the performance data sheet on the replacement cartridge’s packaging or find the certification listing for the exact cartridge number you bought.
Two things “filtered” does not mean:
- It does not mean every microorganism, chemical, mineral, or dissolved solid is removed.
- It does not mean the water is safe for anyone with a compromised immune system — that’s a conversation for your local water authority and a doctor, not a refrigerator spec sheet.
Where Whirlpool’s Documentation Runs Out
Whirlpool documents the filter indicator and reset feature but does not publish the button sequence, filter-life interval, installation steps, or flushing volume in the pages reviewed here. Reset sequences vary by model revision, and the wrong combination leaves the indicator stuck on; the owner’s manual for your exact revision — available through Whirlpool’s product help page for WRS321SDHZ — carries the verified procedure. Without a stated interval, let the indicator guide you rather than a forum number.
One more boundary: Whirlpool identifies this as a US-market model; the retrieved documentation does not establish compatibility or filter availability outside the United States.
Bottom line: confirm you own a WRS321SDHZ refrigerator, pull the filter number off the dispenser label, buy EDR1RXD1 or WHR1RXD1, and read the cartridge packaging for actual removal claims. Skip any source that fills those blanks for Whirlpool.
Common Questions
Can I use a generic cartridge instead of the Whirlpool one?
Third-party cartridges are sold for this dispenser, but the compatibility risk is yours: Whirlpool’s documentation only names EDR1RXD1 and WHR1RXD1. A generic filter may fit and still lack certification for the contaminants you care about. Check that any alternative carries its own performance data sheet before relying on it.
How often does the cartridge need replacing?
Whirlpool’s reviewed pages do not state a filter-life interval for this model. Watch the dispenser’s filter indicator — it signals when replacement is due. If your water tastes or smells off before it trips, replace early.
Why do two different filter numbers show up for one refrigerator?
Whirlpool’s comparison page lists EDR1RXD1, while its owner-center storefront sells the same cartridge as WHR1RXD1, “Refrigerator Water Filter 1.” Both refer to the compatible cartridge family for this dispenser. Confirm against your appliance’s filter label for your specific revision.
Sources
- Whirlpool. “33-inch Wide Side-by-Side Refrigerator — 21 cu. ft., WRS321SDHZ” Product specifications, dimensions, temperature ranges, and current listed price.
- Whirlpool. “WRS321SDHZ Owner Center” Compatible filter listings and current cartridge pricing.
- Whirlpool. “Product Help Page, Model WRS321SDHZ” Owner documentation and model-specific support resources.