The Blaster ran from 1988 through 2006 as the YFS200 — a 200 cc, air-cooled two-stroke sport ATV — and Yamaha stamped a different model code on every model year. Sellers sort inventory by that suffix, so a page shouting “fits 1988–2006 Blaster” is a starting point, not a promise. Pull the code off the frame, match it to the part’s real bracket, and most wrong-order problems vanish in about two minutes.
Yamaha Blaster Parts Compatibility: What Decides Fit
Four things decide fit: the model code, the electrical revision, the mounting dimensions, and the OEM part number. Displacement alone tells you almost nothing.
Cyclepedia’s YFS200 service manual listing breaks the run into yearly codes — 1988 is YFS200U, 1989 YFS200W, 1990 YFS200A, through the 2006 YFS200V. Nineteen codes for one machine. Haynes brackets its repair manual to the same 1988–2006 span.
Then there is 2006, which needs its own flag: it sold as both the standard YFS200V and the YFS200SE Blaster Special Edition, and some listings price those separately. An exhaust advertised for the SE is not automatically the same part number as the standard bike’s.
| Part Category | Typical Listing Range | Confirm Before Ordering |
|---|---|---|
| CDI box | 1988–2002 | Connector count and pickup-coil wiring |
| Stator | 1988–2002 | Four-wire layout and resistance values |
| Stator rebuild kit | 1988–2006 | OEM part number, not the year span |
| Exhaust and silencer | 1988–2006, SE listed apart | SE vs. standard 2006, plus jetting needs |
| Cylinder and head | 1988–2006 | Bore size and OEM casting number |
| Wheels and tires | Per-year listings | Bolt pattern (4/156 front, 4/100 rear) and offset |
| Chain | 520 pitch | Link count — 92 on the 1988 spec |
Do 1988–2006 Parts Really Fit Every Blaster?
No. A blanket 1988–2006 fitment is a catalog convenience, not a guarantee, and catalogs themselves split Blaster parts into exact-fit and universal-fit buckets.
Electrical parts show the gap best. CDI boxes and stators are commonly listed for 1988–2002 only, while stator rebuild kits run the full 1988–2006. Buy a CDI off the wide label for a 2004 bike and you likely own the wrong ignition curve in the wrong connector.
Hard measurements carry the same risk. Published 1988 listing data puts the front tire at 21 × 7-10 on a 10 × 5 wheel with a 4/156 bolt pattern, the rear at 21 × 10-8 on an 8 × 8 wheel with a 4/100 pattern, and the chain at 520 pitch with 92 links. Those are one year’s numbers, not the spec for every Blaster built. Yamaha’s owner-manual sheet lists the YFS200 at 1,735 mm long and 1,035 mm wide, and those figures decide whether an aftermarket bumper or fender set lines up.
Cross-model listings are the other trap. A top-end bearing cataloged for 1987–2006 Banshee and 1988–2006 Blaster is a genuine overlap, but it proves nothing about the next part on your list. If you would rather start from components other owners have already run, this tested Yamaha Blaster parts roundup pairs each pick with the years it actually covers.
Ignition And Charging Parts Have Narrower Year Ranges
Ignition and charging components carry the tightest brackets, which is why a stator or CDI picked from the wide year label alone is the most common wrong order.
Four details settle it: connector count, wire layout, pickup-coil arrangement, and resistance values. A four-wire stator is not a two-wire stator no matter what the range says. Match the OEM number before the price — current specialty-retailer listings run around $89.99 for an OEM-style CDI, $215 for a stator, and $77.99 for a rebuild kit, and those move with the seller.
Fuel and oil catch owners too. The owner’s manual calls for high-octane unleaded only plus Yamalube 2 or an air-cooled two-stroke oil, with 1.3 L (1.37 US qt) in the gearbox. Wrong oil is a parts failure you cause yourself.
Performance parts add their own check. A pipe, silencer, or big-bore top end changes airflow, so confirm jetting, fender clearance, and fastener security against the maker’s instructions before the first ride.
Work this order before you pay:
- Read the model code off the frame stamping or paperwork, not the fender decal.
- Confirm your year sits inside the part’s specific bracket, not the headline range.
- Compare OEM number, connector count, and mounting dimensions.
- On a 2006, check whether the listing names the SE or the standard bike.
Common Questions
Is A Yamaha Blaster A YFS200?
Yes — YFS200 is the factory model designation for the Blaster, a 200 cc air-cooled two-stroke sport ATV sold from 1988 through 2006.
Will Banshee Parts Fit A Blaster?
Sometimes, part by part — never as a whole category. Sellers do catalog some components across both machines, such as a top-end bearing listed for 1987–2006 Banshee and 1988–2006 Blaster. That overlap is a lead, not a green light. Compare OEM number, shaft size, offset, and mounting points for the exact item first.
Where Do I Find The Model Code On A Blaster?
Look for it on the frame stamping or the title and registration before cross-referencing any listing. A worn sticker is common on a machine this old, and the paperwork survives better than the decal does.
Sources
- Cyclepedia. “Yamaha Blaster YFS200 ATV Online Service Manual” Lists the year-by-year YFS200 model codes from 1988 to 2006.
- Haynes Manuals North America. “Yamaha YFS200 Blaster ATV 1988–2006 Service & Repair Manual” Confirms the 1988–2006 production span used for Blaster fitment ranges.