How to Install a Lift Kit on a Yamaha G29 Golf Cart? | Sizes

A Yamaha G29 lift kit installs in three stages: confirm the kit fits, swap the front and rear suspension parts, then set toe-in and retorque.

A 6-inch kit listed for a Yamaha G29 Drive electric will not bolt to a gas cart, and most retailers won’t take back opened hardware. Four details decide fitment: model year and platform, gas or electric, rear axle design, and EFI status. Settle those first; the bolting is the shorter half of the job. The mechanical side is a set sequence — build the front, hang the rear brackets, refit the wheels, set toe-in, retorque — and the rest is patience with a torque wrench.

Lift Kit Fitment On A Yamaha G29: What Decides It

Yamaha G29 and Yamaha Drive name the same platform, and most listings cover 2007–2016 carts in gas and electric form. A kit built for one configuration often won’t fit another, so these four checks come before height, brand, or price.

  • Model year and platform: 2007–2016 is the G29/Drive window; Drive2 (2017 and newer) is a separate fitment. A 3-inch RHOX spindle kit fits G29 gas and electric plus Drive2 electric, and excludes gas EFI Drive2 carts.
  • Powertrain: a representative 6-inch kit is built for the 2007–2016 electric G29/Drive, excluding gas carts, independent-rear-suspension carts, and older G14, G16, G19, and G22 models.
  • Rear axle: solid, fixed axles and independent rear suspension take different rear hardware.
  • EFI: gas EFI carts appear as their own exclusion on several listings, so read the engine badge, not the body style.

A side-by-side Yamaha G29 lift kit roundup makes the height-versus-clearance trade easier to see, especially when two kits at the same height carry very different price tags.

Lift Height Tires It Clears Example Kit
Stock Up to 20.5 in No kit needed
3 in About 22 in RHOX spindle, $408.95
4 in Up to 22 in HD A-arm, $288.95
4 in Up to 22 in All Sports A-arm, $548.95
6 in 23 in Electric G29 kit, $350.99
7 in or taller 25 in Up to $1,228.95

Tire clearance is the number to shop by, not lift height. Retailer tire guides put a stock G29 on tires up to 20.5 inches, about 22 inches at 3 inches of lift, 23 inches at 5 or 6 inches, and 25 inches at 7 inches or more. Buggies Unlimited’s Yamaha lift kit page follows that pattern and pairs each height with a tire cap.

Install Order, Start To Finish

A complete install runs seven stages:

  1. Park on level ground, set an electric cart’s Tow/Run switch to Tow, and chock the wheels.
  2. Jack the cart and set the frame on rated jack stands. Never work beneath a cart held up by the jack alone.
  3. Pull the wheels and move compatible hubs, brakes, and wheels to the new front assembly where the kit calls for it.
  4. On an A-arm kit, replace the stock front end with the supplied A-arms, spindles, and shocks, following the kit manual’s bolt order and thread locker.
  5. Support the rear axle, remove the original U-bolts, and fit the rear lift brackets with the new U-bolts.
  6. Reinstall the wheels, lower the cart, and set front toe-in.
  7. Retorque every nut after the first few rides.

Torque values, alignment specs, and spacer requirements live in the kit’s own manual; the listings publish no universal numbers, and a guessed value on a spindle nut is how front ends come apart.

You’ll know the install worked when the cart sits level front to back, the tires clear the fenders at full steering lock, and a slow figure-eight produces no rubbing or clicking.

What Should You Check After The First Ride?

Recheck the fasteners and reset toe-in once the cart has a few miles on it, because new hardware settles and the front end drifts as the springs seat.

Run a hand around each tire at full lock and look for fender or control-arm contact. Confirm brake cables and lines still have slack at full droop. Then retorque the front and rear hardware to the manual’s numbers, not to feel. A lifted G29 sits taller than the stock cart, so take the first drives gently and expect to relearn the turning circle.

Order by year, powertrain, axle, and EFI; install by the kit manual’s torque numbers; recheck after the first ride. That order keeps a lifted cart tracking straight instead of wandering.

Common Questions

What’s the difference between a spindle lift and an A-arm lift?

A spindle kit spaces the factory spindle down, keeping the stock suspension geometry at lower cost. An A-arm kit replaces the front end with new arms, spindles, and shocks, usually adding travel and a firmer ride. Spindle kits are the simpler driveway install; A-arm kits ask for more work and more money.

How much does a Yamaha G29 lift kit cost?

Height and included shocks explain most of the spread.

Can a 6-inch kit go on a gas Yamaha G29?

No. The representative 6-inch kit is specified for the 2007–2016 electric G29/Drive and expressly excludes gas carts, independent-rear-suspension carts, and older G14, G16, G19, and G22 models. Gas owners should shop a kit naming gas G29 in its fitment, then confirm the rear axle type before ordering.

Sources

Scroll to Top