How to Choose the Right Power Brick for Your Xbox Console | Match The Model First

Only the original Xbox One uses an external power brick; Xbox One S, Xbox One X, and every Series console draw power from an internal supply and take no brick at all.

Buying the wrong brick is easy because the cases look alike and the plugs look close enough. The original Xbox One is the one console in the family that needs an external supply, and that supply is built for that console alone. Get the model wrong and you spend money on a part that either won’t fit or, worse, fits and stresses the console. Microsoft’s support pages draw the line clearly, and the steps below do the same.

Which Xbox Consoles Actually Need An External Power Brick?

One console in the lineup needs a brick. Every model released after it does not.

  • Original Xbox One — external AC power supply required. It sits between the wall outlet and the console.
  • Xbox One S — internal power supply. No external brick is used or supported.
  • Xbox One X — internal power supply, same story.
  • Xbox Series S and Xbox Series X — internal power supplies. No brick.
  • Xbox 360 — has its own separate supply, and it is not interchangeable with an Xbox One brick.

The fastest way to tell: if a large block sits on the floor or behind the TV between the outlet and the console, you’re looking at an original Xbox One or an Xbox 360. If the cord runs straight from the wall to the console, the console has its own internal supply and no brick exists to replace.

Console Power Setup Brick Needed?
Original Xbox One External power supply Yes — model-specific
Xbox One S Internal No
Xbox One X Internal No
Xbox Series S Internal No
Xbox Series X Internal No
Xbox 360 Separate supply Yes — Xbox 360 only

How Do You Match A Replacement Brick To Your Console?

Match on the exact console generation and model, not on connector shape. Microsoft’s guidance is blunt: unlicensed accessories plugged into the Xbox One power socket can damage the console and void the warranty.

  1. Read the model name on the console itself — not the box, not the listing photo.
  2. Check the label on your existing supply for its Microsoft identification details and electrical ratings.
  3. Confirm the replacement is built for the original Xbox One specifically. Not a 360 unit, not a One S or One X part, not a Series part.
  4. Prefer genuine Microsoft replacement parts through Microsoft’s service channels or an authorized provider.

A connector that slides in does not prove compatibility. Voltage, current rating, and internal wiring all have to line up, and third-party listings routinely skip those details. If you’re weighing aftermarket options against genuine parts, this roundup of tested Xbox power brick picks covers what actually holds up.

What If The Console Won’t Power On?

Before buying anything, rule out a loose connection and a dead outlet. Microsoft lists a faulty or improperly connected supply as one cause of a no-power console, and that check costs nothing.

For the original Xbox One, Microsoft documents a supply reset worth running first. Unplug the cables from the console, the wall outlet, and the power supply. Wait 10 seconds. Reconnect the supply to the wall outlet and to the power supply — but leave the console unplugged for now. Then check the LED on the supply.

If the LED stays dark after a known-good outlet and a proper reset, the supply is the likely culprit. The reset procedure is laid out on Microsoft’s page for resetting your Xbox One power supply unit, and it applies to the original Xbox One only — One S and One X have different power arrangements and no brick to reset.

What Safety Rules Should You Follow With A Power Brick?

Treat the brick as a sealed electrical component and keep it breathing. Microsoft warns that modified or non-genuine replacement parts can lead to injury, property damage, or console damage, so opening, repairing, or bypassing one isn’t a DIY job.

  • Never swap in a supply with a different voltage, current rating, or wiring just because it fits.
  • Place the brick where air circulates — away from carpet pile, enclosed cabinets, heat sources, and moisture.
  • Keep the console ventilated too; Microsoft notes repeated shutdowns can follow poor airflow.
  • Disconnect and replace a brick that runs unusually hot, smells, smokes, makes odd sounds, shows damage, or keeps shutting the console down.
  • Use the correct US-rated power cord and a working grounded outlet.

Replace a suspect brick before it takes the console with it. A cheap supply is not a bargain if it costs you the machine.

Common Questions

Can I use an Xbox 360 power supply on an original Xbox One?

No. Xbox 360 supplies and original Xbox One supplies are separate designs and are not interchangeable, even though both consoles use an external brick. Using the wrong generation’s supply risks damage to the console.

Does the Xbox One S have a power brick I can replace?

No. The Xbox One S uses an internal power supply, so there is no external brick to buy, swap, or reset. If a One S won’t turn on, the problem sits inside the console or at the outlet, not in a removable part.

Should I buy a genuine Microsoft brick or a third-party one?

Microsoft recommends genuine replacement parts and warns that unlicensed accessories on the Xbox One power socket can damage the console and void the warranty. A third-party unit has to match the original Xbox One’s electrical ratings exactly — if those aren’t published, skip it.

Sources

Scroll to Top