Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your stove door glass cracked, and now you need the right panel before the next cold snap. The quick answer: match the part number and the exact measured size to your stove model first, then buy. A glass panel that is a fraction off will not seal, and a poor seal lets smoke into the room. This guide covers six real replacement panels and the measurements that decide which one fits.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Replacement glass is not a one-size part, so the model number on your stove’s data plate matters more than anything else. Below you will find measured panels, heat ratings, and gasket details for each option. Choosing the best wood stove glass replacement starts with matching your stove’s exact model and measured opening.
Top Picks


How To Choose The Best Wood Stove Glass Replacement
Buying stove glass is really a measuring job. You are matching a flat panel to a metal frame that was stamped for one specific stove, so guessing gets you a part that rattles, leaks smoke, or will not sit flush. Match the model plate and the measured opening, and the rest is straightforward.
Start with the stove’s model plate, not the glass
Every wood stove carries a metal data plate, usually on the back or under the ash lip. Write down the make and the model number from that plate. A replacement panel is listed by the stove models it fits — for example, one panel here covers the Quadra-Fire 3100 and 4300, while another covers a long list of pellet and wood units. A panel sold for your exact model removes most of the risk.
Measure the opening, then compare to the listed size
Take a tape to the glass opening in the door frame, not the old shattered piece. Measure the width and the height at the widest points. Then compare that to the panel’s listed size. A 9-1/8″ x 9-1/8″ panel and a 12 1/4″ x 9 1/16″ panel are very different parts, and neither will fit the other’s stove. If your measurement lands between two listed sizes, the panel is wrong for your door.
Check for an arch or a corner cut
Some doors are not plain rectangles. One Vermont Castings panel here measures 10-1/8″ x 8-7/8″ and carries an arch on the corner. A square panel will not seat in an arched frame, so look closely at the shape of your old glass or the empty opening before you order.
Decide if you need the gasket too
The gasket is the rope-like seal that sits between the glass and the metal door. Some kits include it and some sell bare glass. If your old gasket is flattened, brittle, or missing, a kit with gasket and tape saves you a second order. A bare panel is fine when your existing seal is still soft and intact.
Side-by-Side Comparison
| Model | Best For | Listed Size | Heat Rating | Weight | Amazon |
|---|---|---|---|---|---|
| US Stove Door Glass Kit★ Best Overall | Magnolia and wide model list | 12 1/4″ x 9 1/16″ | — | — | Amazon |
| Stove Parts For Less AC-G9Most Versatile | Square pellet and wood doors | 9-1/8″ x 9-1/8″ | 1,200° F | 1.5 lb | Amazon |
| Vermont Castings 1408629 | Defiant Encore and Madison | 10-1/8″ x 8-7/8″ | — | 1.5 lb | Amazon |
| Endeavor/Parlor/Patriot Door Glass | Lopi stoves | 15 ⅜” x 8 ⅞” | 1,200° F | 2.5 lb | Amazon |
| Door Glass for 3100 & 4300 | Quadra-Fire 3100 and 4300 | — | — | 3 lb | Amazon |
| Hearthstone 17 9/16″ x 11 3/16″ | Heritage and Mansfield stoves | 17 9/16″ x 11 3/16″ | — | — | Amazon |
Detailed Reviews
1. US Stove Door Glass Kit
Our pick — 4.5+★ from 80+ verified ratings; the strongest balance of quality and price.
One panel that covers a whole spread of US Stove models, sized 12 1/4″ by 9 1/16″.
If your stove is a US Stove unit, this is the panel to check first. It is cut to 12 1/4″ x 9 1/16″, and it is built from ceramic glass — the heat-tolerant type made for the inside face of a firebox door. The fit is what wins people over: it is the thing buyers single out most often, and the quality of the glass comes right behind it. The crowd verdict is a solid one, sitting at 4.5+ stars.
This is a bare panel, not a full kit with gasket and tape. If your old gasket is still soft, that is all you need. If it is flattened or crumbling, plan to buy the seal separately. And unlike the Stove Parts For Less kit, which ships with its gasket in the box, this one expects you to bring your own seal.
The part suits the 2015 Magnolia plus a long list of other US Stove units, so confirm your model is on that list before ordering. Confirm your US Stove model is on the list and this bare ceramic panel drops straight in.
What this panel gets right
- Ceramic glass built for the inside face of a firebox door
- Fit is the quality owners single out most, with glass quality close behind
- Covers the 2015 Magnolia and a wide list of additional US Stove models
Where it asks more of you
- Bare glass only — gasket and tape are not included
- You must confirm your exact model appears on the compatibility list
Reach for this if: you own a US Stove unit on the compatibility list and your existing door seal is still in good shape.
Look elsewhere if: you need gasket and tape in the same box, or your stove is a different brand entirely.
2. Replacement 9-1/8″ x 9-1/8″ Door Glass Kit AC-G9
A square 9-1/8″ kit that brings the gasket along for the ride.
The number worth knowing here is 1,200° F — the temperature this glass is rated to resist, or 648° C. That is the heat rating the maker lists, and it is paired with low thermal expansion, which matters because a panel that expands and contracts unevenly can crack under a hot fire. At 1.5 pounds it is the lightest panel in this group alongside the Vermont Castings part, and it is noticeably lighter than the 3-pound Quadra-Fire assembly.
What you get in the box is the glass and the gasket together, so you are not hunting for a seal on a second order. The compatibility list is the longest of any pick here, running through a wide spread of pellet and wood models — the 18, 24, 25, 50, and 55 series all appear. Measure your opening at 9-1/8″ square and one of those models is likely yours.
The catch is honest: this is a square panel, so an arched or corner-notched door frame will not take it. Confirm the shape of your opening as well as the size. Beyond that square-only limit, the glass and gasket arrive together in one box.
The heat spec that counts: a 1,200° F rating with low thermal expansion is the reassurance you want behind stove glass, and the bundled gasket means one order covers the whole job.
Your match if: your door opening is a true 9-1/8″ square and you want the seal included in the same box.
Not your part if: your frame has an arch or a corner cut that a square panel cannot fill.
3. Vermont Castings Right Door Glass 1408629
A narrow-fit panel for Vermont Castings doors with a shaped corner.
This one is a niche part, and that is exactly its value. It measures 10-1/8″ x 8-7/8″ with an arch on the corner, so it fits frames where a plain rectangle would leave a gap. It is the right-hand door glass for the Defiant Encore 2190, Encore 1450, Encore 2550, Madison 1650, and Madison 1655 — the maker lists the Vermont Castings part number 1408629. At 8.75 inches wide, it is a good deal narrower than the 11.18-inch-wide Hearthstone panel here, so it suits a smaller door frame.
It is also light, at 1.5 pounds, matched only by the Stove Parts For Less kit in this set. That lightness is easy to handle on a ladder or over a hot stove. The size is fixed, though — this will not stretch to a larger opening, and it is sold for those specific Vermont Castings models only.
The catch is that this arched right-hand panel fits only the listed Defiant Encore and Madison models. If your data plate says Defiant Encore or Madison, it is the panel made for you. If not, it is the wrong part no matter how you measure it.
Made for the shaped frame
- Corner arch lets it seat in a door where a square panel will not
- Light at 1.5 pounds, easy to handle
- Explicit right-hand glass for a named set of Vermont Castings models
The narrow part of the deal
- Fits only the listed Defiant Encore and Madison models
- Fixed 10-1/8″ x 8-7/8″ size leaves no room to adapt
Buy it when: your Vermont Castings stove is on the Defiant Encore or Madison list and you need the right-hand panel with that corner arch.
Pass on it when: your stove is a different make or a plain rectangular door — this panel will not convert.
4. Endeavor/Parlor/Patriot Door Glass
A long, low panel for Lopi stoves, rated to 1,200° F.
This is the wide, shallow shape, cut at 15 ⅜” long and 8 ⅞” high with a 3⁄16″ thickness. That thickness is a real number to note: it is a hair thicker than the 0.13-inch US Stove panel, so it sits a little heavier in the frame. The maker rates it to 1,200° F (648° C) with low thermal expansion, the same heat tolerance as the Stove Parts For Less kit.
What it covers is the Lopi line — Avenger, x96, 380-NT, PA1 through PA5, Endeavor, Parlor, Patriot, and Answer. If your stove is one of those, this is the panel cut for it. It also carries an amber colour, so the glass has a warm tint rather than the clear look of most panels here.
The trade-off is the shape. This is a long panel, so it will not fit a compact square door — and the amber tint may not match a clear original if you care about that. For a Lopi owner with a wide door, though, this is the direct fit.
The shape at a glance: long and low at 15 ⅜” by 8 ⅞”, so it fills a wide Lopi door rather than a tall, squarer one.
Pick this one: your stove is a Lopi on the compatibility list and your door is the wide, shallow shape.
Keep looking: your opening is square, or you want clear glass rather than an amber tint.
5. Door Glass for 3100 & 4300 Wood Stoves
The Quadra-Fire assembly that carries the highest score in this set.
This is a whole door glass assembly for the Quadra-Fire 3100 and 4300 wood stoves, sold under the 7000-012 part number. It is the heaviest panel here at 3 pounds — twice the weight of the 1.5-pound Stove Parts For Less and Vermont Castings parts — which reflects that it is a full assembly rather than a bare pane. Buyers rate it the highest of the six, at 4.5+ stars.
The fit is narrow and deliberate. If your stove is a 3100 or a 4300, this is the assembly built for it, and there is no measuring guesswork. If your stove is anything else, this is not your part. The heavier build suits the frame it was designed for, but lighter panels are easier to set by hand.
The one thing to check before ordering is your model plate. This covers exactly two Quadra-Fire models, and no others. Confirm your plate reads 3100 or 4300 and the 7000-012 assembly is a direct fit.
Why it leads the scores
- Full assembly for the Quadra-Fire 3100 and 4300, so no size guessing
- The strongest owner rating in this group at 4.5+ stars
- Named part number 7000-012 makes the match easy to confirm
What to weigh before you buy
- Heaviest panel here at 3 pounds, so handling takes a bit more care
- Covers only the 3100 and 4300 models — no wider compatibility
Made for you if: your data plate reads Quadra-Fire 3100 or 4300 and you want the assembly rather than a bare pane.
Wrong part if: your stove is a different make or model — this is a two-model fit only.
6. Hearthstone Heritage 8020 Glass with Tape and Gasket
The largest panel of the six, and it arrives with new tape and gasket.
This is the big one: 17 9/16″ long and 11 3/16″ wide, cut for the Hearthstone Heritage 8020, Homestead 8570, and Mansfield 8010, 8011, and 8012 under the 90-57005 part number. It is a good deal longer than the 9.13-inch Stove Parts For Less panel — nearly double — so it fills a tall door the smaller panels cannot touch. The tape and gasket are included, so the whole reseal comes in one order.
Because it is so large, size is also the risk. A tall 17 9/16″ panel gives you no room to trim or adapt, so your opening has to match it exactly. Measure the full width and height of the frame before ordering. If your Hearthstone model appears on that list and the opening measures up, this is a complete, no-second-trip solution.
At 17 9/16″ x 11 3/16″ there is no room to trim, so a measurement that slips means a panel that will not seat. Confirm the model and the size, and it is a clean fit with the seal built in.
The size that decides it: at 17 9/16″ by 11 3/16″ this panel is the tallest option here, and the bundled gasket and tape turn it into a one-order fix for the right Hearthstone stove.
Order this one: your stove is a listed Hearthstone Heritage, Homestead, or Mansfield and the opening measures the full 17 9/16″ by 11 3/16″.
Skip the gamble: if your opening is even slightly smaller than that — a tall panel this size has to match exactly.
Know the Specs
Heat-resistance rating
This is the temperature a glass panel is built to withstand, written in degrees Fahrenheit and Celsius. A higher number means the glass is made to handle more heat without warping. You will see it listed with low thermal expansion, which means the panel expands and contracts gently as it heats and cools — so it is less likely to crack under a hot fire.
Measured size versus the opening
Replacement glass is listed by length and width, and sometimes thickness. The number that matters is your measured opening, not the old shattered piece. A panel must match that opening closely, because a poor fit leaves a gap that lets smoke and heat escape around the glass. Always compare the listed size to your own measurement before ordering.
Gasket and tape
The gasket is the seal that sits between the glass and the metal door, and tape holds it in place during the install. Some kits include both and some sell bare glass. If your existing seal is brittle or missing, a kit with gasket and tape saves you a separate order. If the old seal is still soft, a bare panel is enough.
Part number and corner shape
A maker’s part number, like 7000-012 or 1408629, pins the glass to specific stove models so you can check it against your data plate. Corner shape matters too — an arched or notched edge is cut for a shaped frame, and a plain rectangle will not seat in one. Confirm both the part number and the frame shape before you buy.
Common Questions
How do I measure for a wood stove glass replacement?
Do I need to know my stove model number before buying?
Does replacement glass come with a gasket?
What does a 1,200° F glass rating mean?
Can I use a square glass panel in a door with an arched corner?
Is heavier stove glass better than lighter glass?
Will the same glass fit both a wood stove and a pellet stove?
Can I trim or alter a replacement glass panel to fit?
Why does corner shape matter as much as size?
The Bottom Line
If you own a US Stove, start with the US Stove Door Glass Kit for your wood stove glass replacement. Its 12 1/4″ x 9 1/16″ ceramic panel fits the 2015 Magnolia and a long list of other US Stove models, and buyers praise the fit most. Want the seal in the box and a square 9-1/8″ opening? The Stove Parts For Less AC-G9 kit includes the gasket (the rope seal that stops air leaks) and carries a 1,200° F heat rating, so it holds up to a hot fire. For a Quadra-Fire 3100 or 4300, the Door Glass assembly is the pre-matched part and the highest-rated pick here at 4.5+ stars. Check your model plate and measure your opening, and one of these six panels gets your firebox door back in service.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.



