Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Which Xbox Series X wall mount you should buy depends on one thing above all: whether it lets your console pull in air all day long. The Series X breathes through its base and pushes heat out the back, so a bracket that traps the bottom or hugs the console flat against drywall makes a warm, noisy console. The pick below wins on real owner experience — 4.5+ stars across 400+ ratings — while the other eight solve different problems, from controller storage to active cooling fans.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You’ll see what each bracket is made of, how it handles cables and controllers, and which one fits your setup. Every pick here is a genuine mount for the Series X, so the only job left is finding the one that suits your wall — this breakdown covers the best xbox series x wall mount options worth fitting.
Top Picks
How To Choose The Best Xbox Series X Wall Mount
Three things decide whether a mount is genuinely good for your Series X: how the console gets its air, how the bracket carries the weight, and where the controllers end up. Get those three right and the rest is detail.
Airflow is not a marketing line
The Series X moves hot air through the base and out the back. A bracket with holes or slots under the console lets that heat leave; a flat, sealed shelf traps it. Look for open-bottom or vented designs rather than a solid plate.
Many mounts also add a gap so the back of the console is not pressed flat to the wall. That rear gap matters in a small room or a closed cabinet, where hot air otherwise recirculates.
Load rating and material
A steel bracket carries weight rigidly, so a clamped console does not slowly tilt over months. Powder-coated steel resists rust and scratches and is what most serious mounts use.
ABS plastic brackets can be rated high — some list 45 lbs — but the material itself is thicker and less forgiving. A plastic bracket is not automatically a bad one, but check its load rating and the wall anchors before trusting it.
Wall anchors and where you install
Most of the bracket’s strength sits in the fixings, not the frame. Screws and anchors are usually included, but they suit timber stud or drywall installs — masonry and plasterboard need hardware matched to that wall. If the box includes an anchor set, read the box before drilling.
Controller and headset storage
Hooks that hold two controllers and a headset turn the mount into a full station, which is the real reason people buy them. Detachable hooks mean you can decide whether the accessories hang under the console or on the bracket itself.
One thing to check: whether the hooks attach firmly. Some buyers find the controller portion fits less securely than the console portion — which only matters if you plan to hang heavy pads off it.
Side-by-Side Comparison
| Model | Best For | Material | Load Rating | Controller Storage | Amazon |
|---|---|---|---|---|---|
| HIDEit Mounts for Xbox Series X★ Best Overall | Best Overall | Powder-coated steel | — | None included | Amazon |
| Xbox Series X Wall Mount Kit (ALIENERGY)Easy Install | Easy install | Alloy steel | 30 lbs | 2 accessory mounts | Amazon |
| Aluminium Alloy Wall Mount (ANSHAWTIY)Compact & Foldable | Foldable design | Aluminium alloy | — | Built-in holder | Amazon |
| BracNova Wall Mount | Ventilation gap | Powder-coated cold-rolled steel | 45 lbs | 2 controllers or 1 + headset | Amazon |
| ZAONOOL Wall Mount | Full accessory kit | Sturdy ABS | 45 lbs | 2 controllers + headset hook | Amazon |
| VIVO Wall Mount | Security lock | Alloy steel | 17.6 lbs | None included | Amazon |
| Funturbo Wall Mount | Foam anti-vibration | Metal with EVA foam | — | None included | Amazon |
| TotalMount Pro Bundle | Heaviest load | Metal | 75 lbs | 3 controller holders | Amazon |
| Mcbazel Wall Mount | Active cooling | ABS | 10 kg | 3 removable hooks | Amazon |
Detailed Reviews
1. HIDEit Mounts for Xbox Series X
Our pick — 4.5+★ from 350+ verified ratings; the strongest balance of quality and price.
A single flat steel wrap that holds the console firmly without a shelf underneath it.
If you want the least fuss and the most confidence, this is the one. The bracket is a cold-rolled steel plate with a wrap that folds over the console, so there is no tray under it to trap warm air. It is 6.22 x 6.06 x 12.1 inches, small enough to tuck behind a TV and shallow enough that the console does not stick far off the wall.
What earns it the top slot is the mounting — the wrap keeps it tight and it does not sag at the back corner the way a plastic shelf can. Owners rarely talk about anything else: it goes up in one sitting (one report of about 15 minutes with the included hardware) and it holds the console where they put it. The one thing to weigh is that the wrap fits close to the console’s edges, so align it properly on the first go. A few owners find the mounting hardware mixed in quality, which is worth reading the box for before you drill. And the price sits higher than the ABS mounts — you pay for steel plate and a made-in-USA brand rather than a picture on a box.
For a clean wall behind the TV with no controller clutter, this is the pick. It is not the one to buy if you want integrated hooks, and the price reflects the steel rather than the reviews — but the strength of the review pattern behind it is real. The tray-style mounts here add only a fraction of an inch of depth (the BracNova’s 6.3 inches versus this one’s 6.22), and that extra room comes with a ledge to clean around.
What stands out
- Steel plate rather than a tray, so the base vents stay clear
- Fast install — roughly 15 minutes in practice
- Wrap design keeps the console from sagging at the back
- Full access to vents, ports and the disc drive
Worth knowing
- No controller or headset hooks included
- Mounting hardware gets mixed notes; inspect before drilling
- Costs more than the plastic-shelled options
Pick it for: a spotless steel install where the console itself is the only thing on the wall.
Think twice if: you want the pads and headset hanging off the same bracket.
2. Xbox Series X Wall Mount Kit (ALIENERGY)
Open-bottom steel that lets heat fall away while the console sits mid-wall.
The first thing to note about this one is the open bottom — no flat plate under the console, so the hot exhaust from the base drops free instead of pooling. It is a steel build rated to 30 lbs, heavy enough for the Series X with room to spare for the bracket’s own hardware. Powder-coated finish keeps it from scratching the case as the console slides in.
The kit is the reason many buyers grab it: six screws, six anchors, two accessory mounts, soft pads and a small level, so you do not need a toolbox hunt before the install. That aligns with the reviews — easy installation is the most-praised point by a clear margin, with the look and sturdiness close behind. Owners describe the steel as something that will not bend, which is the right sign for a console that sits unsupported at the centre of its own weight.
Where it gives up ground is the polishing: it is a plain bracket with no branding flourishes and no controller hooks beyond the two small accessory mounts. If you plan to hang a headset and both pads, look at the models with dedicated hooks rather than using this one. Otherwise, this is the strongest value on a steel install.
Strongest play here: a steel, open-bottom mount for anyone who wants it up in one pass with the box contents.
Not the one if: you need a full controller-and-headset station built onto the bracket.
3. Aluminium Alloy Wall Mount (ANSHAWTIY)
A folding aluminium bracket that collapses flat when you move the setup around.
Most mounts in this space are one rigid piece. This one folds, so it collapses into a thin shape for storage or a move, which makes it the pick for anyone in a dorm room, rented flat or small gaming corner. The body is aluminium alloy, which is why it feels light without a plastic flex — 0.79 kg for the whole bracket.
It comes with a built-in controller holder and a pair of compartments, so one pad has its own spot without extra parts. The design also includes cooling vents around the console rather than a solid floor. There is no plastic in the load-bearing section, which matters if you will hang it and forget it for months.
Your real limit here is what holds it up: it needs a proper wall, and the included instructions make that easy, but there is no included depth adjustment. So check you have a stud or an anchor set rated for the loaded bracket. There is also no review history to lean on, and the fold mechanism adds a moving part that a solid steel plate does not have. If you want the simplest install with nothing to fold, the HIDEit plate is the safer long-term bet.
The fold is the feature: aluminium alloy keeps the weight low while a two-compartment layout makes it a compact station rather than a plain shelf.
Before you drill: check the wall type — the adjustability of the fold does not change how the bracket anchors.
Built for: movers, students, or a setup that shifts layout often.
Look elsewhere if: you want a permanent, no-moving-parts steel plate.
4. BracNova Wall Mount for Xbox Series X
The steel mount that leaves a deliberate gap between console and wall for airflow.
Your console gets more breathing room here, because most brackets put its back almost against the wall. This one stands it off, so air can pass down the back and through the bottom holes. The frame is cold-rolled steel (steel rolled and pressed into shape), powder-coated and rated to hold up to 45 lbs — a comfortable margin over the Series X itself. That extra strength is why it comes out larger (6.3 x 6.61 x 16.14 inches) than the HIDEit plate above.
The trade that extra room buys you is the standoff that helps cooling — that is the whole point of the design. What owners consistently like is the build: quality is the most-praised aspect by a long run, with durability next, and the finish holds up without dings. It also ships with two detachable hooks that will hold two controllers, or one controller and a headset. Those hooks can be moved, so the gear sits under the console or on the bracket depending on your room.
Two notes before you buy. Installation feedback is split — some find it easy, some find the position sticker and drill alignment less forgiving than they expected, so give yourself a clear afternoon. And the fit of the controller hooks is the other recurring point, with the hook sometimes feeling less attached than the console tray. Neither flaw stops the bracket from holding the console securely. It is just worth knowing the console seats more easily than the controller hooks do.
The standoff wins it: the back gap is the reason to choose this one, and the 45 lb rating means you are not relying on the wall alone.
The bit to plan for: the sticker-based install rewards a steady hand and a second person more than it rewards speed.
Reach for this: if your console sits in a warm room and you want real clearance behind it plus somewhere for the pads.
Give it a pass: if you want a five-minute, no-adjustments install.
5. ZAONOOL Wall Mount
A full kit with a headset hook and two controller cradles in the box.
If the purchase you are making is really “get the console and all its junk off the shelf”, this is the one to look at. It ships as a complete set: the mount, a headset hook, two controller holders, six screws, six anchors, a small bubble level and a manual. Everything is detachable, so the hooks can hang on the bracket or sit against the console instead.
The airflow design is genuinely thought through. There are 24 small holes on the bottom, matched to the Series X exhaust layout, plus five larger holes at the rear that double as cable pass-throughs for HDMI, USB, Ethernet and power. That is a lot more air path than most of the plastic brackets at this price. Owners talk about the build quality more than anything else, with value for money a close second — which fits a kit that arrives with the level already in the box.
The one honest catch is the anchors. Wall anchors are the single biggest recurring gripe in the feedback for this mount: they are the item people swap out. Buy a proper anchor set for your wall and this becomes a very solid install. It holds up to 45 lbs, backed by a two-year warranty, and the ABS shell will not rust — the trade for plastic is that it is thicker than steel at the same strength.
Why this one earns the middle spot
- Complete kit — hook, two holders, screws, anchors, level and manual
- 24 bottom vents matched to the console exhaust
- Five rear holes for airflow plus cable routing
- Two-year warranty and ABS body that will not rust
Where it asks for caution
- Included anchors are the most-cited weak point — upgrade them
- ABS plastic rather than steel, at the same rated capacity
The pick for: a tidy wall station where everything has a home on day one.
Skip the box anchors: buy masonry- or plasterboard-appropriate fixings and this is as dependable as any steel bracket.
6. VIVO Wall Mount
A steel bracket with a lock tab, built for a shared or busy room.
The feature that separates this from the rest is the security lock — a tab that latches the console in place, so it does not lift out if someone bumps it. That matters in a shared living room or a house with kids. The steel frame is rated for 17.6 lbs, which is a lower ceiling than some of the heavy-duty options here, but still plenty for the Series X with margin.
Owners describe it as holding firmly with no wiggle, and they cite easy installation and clear instructions as the strongest parts of the experience. The open design leaves the ports and the disc drive reachable, and the supplied hardware covers both stud and drywall installs, so you are not improvising. The one spec worth flagging: the low load rating is the ceiling — fine for one console, not the one to pick if you plan to add extra gear to the bracket.
It sits slim on the wall at 6.5 x 6.3 x 12.3 inches and 2 lbs, and the 3-year warranty is the longest on this list for a basic steel bracket. If you are putting the console anywhere guests or children can reach it, the lock earns its place.
The lock is the point: a latched tab means the console cannot be lifted off by a bump or a curious hand.
Look past it if: you want a high weight ceiling or controller storage.
Best for: busy living rooms where the console could get knocked.
Not for: anyone planning to hang gear off the bracket alongside the console.
7. Funturbo Wall Mount
Foam-lined steel that damps the fan’s vibration instead of passing it into the wall.
Fans create a low hum, and a metal bracket transfers it straight into the plaster. This mount deals with that by lining the contact points in EVA foam, which absorbs that shake. On top of that, the underside holes line up 1:1 with the Series X base vents, so exhaust leaves along the same path the console designed for.
It holds the console facing forward, so the glowing Xbox logo stays visible and the disc slot faces you — a small convenience that matters if you still use physical games. The steel is spray-painted for a finish matched to the console, and it is built to stay rust-free. With 879 g of bracket, this one feels substantial when it is off the wall.
The adjustment to accept is that this is a single-purpose bracket — no controller hooks, no headset loop, no extra storage. If you need the pads off the floor, the ZAONOOL and BracNova options do that job. This one is for the buyer who wants the console itself mounted solidly and quietly, and who will store everything else elsewhere.
Go with it: in a bedroom or a quiet room, where a metal bracket’s hum would be the thing you notice.
Not a fit: if controller storage is part of the plan.
8. TotalMount for Xbox Series X – Pro Bundle
Seventy-five pounds of rated capacity and three cradles for the whole setup.
The number to start with is the load rating: 75 lbs. That is not because the console needs it — it is because a bracket that far overrated does not flex, and flex is what lets a mount slowly sag at one corner. The sides grip the console so it cannot tip out of the frame, which is the difference between this and a plain open shelf.
The Pro Bundle adds three controller holders, so the pads and the console all get a home. Access is left clear for the disc slot, the expansion-card slot, HDMI, USB, Ethernet and the power lead, including large memory cards. Owners say it goes up in about five minutes with zero wobble once it is on.
What you give up is a hidden look: this is a chunky bracket built for security rather than a low profile, and the red colourway is a deliberate look rather than a stealthy one. If your setup is dark and minimal, the plain-black steel of the HIDEit above blends in more. If the console hangs in a busy room and you want overbuilt confidence, this is the heaviest-rated bracket in the whole list.
The case for it
- 75 lb rating gives a large margin over the console alone
- Side grips stop the console tipping out if it is bumped
- Three controller holders included in the Pro Bundle
- Clear path to the disc, expansion slot and all rear ports
The other side
- Noticeably bulkier than a flat steel plate
- Red colourway is not a subtle look
- Overkill on capacity if you only want a simple mount
The strongest grab: a shared, high-traffic room where the console takes knocks.
Not needed if: you want the flattest, least visible bracket on the wall.
9. Mcbazel Wall Mount with Cooling Fan & RGB
The only mount here that blows air itself, with three speed settings and RGB.
Most of these brackets move heat by letting it leave. This one adds twin fans that sit under the console and push, with three touch-selected speeds up to 2100 RPM. Speed and lighting are both changed by touch — no app and no remote to lose.
You get your gear off the floor with the extras: three removable hooks for controllers and a headset, a light bar you can switch off entirely, and three USB ports. One is USB 3.0 (the faster data standard) for data, and two are USB 2.0 (the older, slower standard) for topping up pads, a headset or a phone. The honest caveat is power: the fan, the lights and the ports all draw from the console, so none of them work when it is asleep or switched off. Plan your charging around that.
The build is ABS, rated to 10 kg, and it is shaped only for the Series X — the Series S has a different profile and will not seat in it. Installation gets the strongest notes in its feedback, including reports of the console snapping into place. Stability divides opinion a little, which is worth knowing if you have kids or pets at console height.
It does more than hold: three fan speeds, a switchable light bar and three USB ports make it a small wall station.
Remember this: the fan, lights and ports only run while the console is on, so it cannot trickle-charge overnight.
Choose it: if you want cooling help plus a charging spot for controllers and a headset.
Reconsider: if your setup needs to charge while the console is off, or if the Series X shares a room with a Series S.
Know the Specs
Load rating (in lbs or kg)
The load rating is how much weight the bracket is designed to hold. A rating of 17.6 lbs is fine for the Series X alone; 45 lbs and 75 lbs mean the bracket is overbuilt, so it does not flex over time. Flex is what lets a mount sag at one corner months later.
Material: steel vs ABS
Steel brackets are thin, rigid and powder-coated to resist rust and scratches. ABS plastic is thicker, has no rust risk and can still be rated to 45 lbs. Plastic flexes under load slightly more, so check the rating and the wall anchors either way.
Vent holes and standoff gap
The Series X exhausts heat through its base. Vent holes on the bottom of a mount, plus a gap behind the console, let that heat leave. A solid shelf under the console traps warm air, and a closed-in back means the same air gets recirculated.
Controller and headset hooks
Hooks are the difference between a mount and a storage station. Detachable hooks let you decide whether the pads hang under the console or on the bracket. Check that the accessory mounts attach firmly if you plan to hang a headset from them.
Wall anchors and fixings
The anchors are often the weakest link in the box. They are usually sized for timber stud or standard drywall; masonry and thin plasterboard need their own hardware. If the included anchors are the item reviewers swap out, buy a better set before you drill.
Fan speed and power draw (active mounts)
Active mounts add fans rated in RPM — up to 2100 RPM on the Mcbazel. Those fans, plus RGB and USB ports, draw power from the console itself, so they only run while it is on. That is a convenience feature, not a cooling guarantee.
Common Questions
Will these mounts fit an Xbox Series S or an Xbox One?
Does a wall mount make the Xbox Series X overheat?
How much weight do I actually need a mount to hold?
Can I install one of these on drywall without a stud?
Does a mount block the disc drive or the ports?
Can I put the mount behind the TV?
Is a plastic bracket safe for a Series X?
Do the controller hooks hold anything other than controllers?
Can the cooling fan on a mount run while the console is off?
Can I mount the console vertically instead of horizontally?
The Bottom Line
For most people, the best xbox series x wall mount is the HIDEit Mounts for Xbox Series X. A single powder-coated steel plate with a wrap design holds the console firmly, with no shelf to trap heat — and 400+ ratings averaging 4.5+ stars back that up. If you want the controllers and headset off the floor too, grab the ZAONOOL Wall Mount for its two holders, headset hook and 24 bottom vents. And for a warm room where you want active airflow and USB charging, reach for the Mcbazel Wall Mount. Whatever you pick, buy better wall anchors than the ones in the box — that single upgrade turns any of these into a mount you never think about again.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.